node-feature-discovery/docs/get-started/deployment-and-usage.md

title	layout	sort
Deployment and Usage	default	3

Deployment and Usage

{: .no_toc }

Table of Contents

{: .no_toc .text-delta }

1. TOC {:toc}

---

Requirements

1. Linux (x86_64/Arm64/Arm)
2. kubectl (properly set up and configured to work with your Kubernetes cluster)

Deployment options

Operator

Deployment using the Node Feature Discovery Operator is recommended to be done via operatorhub.io.

1. You need to have OLM installed. If you don't, take a look at the latest release for detailed instructions.
2. Install the operator:

kubectl create -f https://operatorhub.io/install/nfd-operator.yaml

1. Create NodeFeatureDiscovery resource (in nfd namespace here):

cat << EOF | kubectl apply -f -
apiVersion: v1
kind: Namespace
metadata:
  name: nfd
---
apiVersion: nfd.kubernetes.io/v1alpha1
kind: NodeFeatureDiscovery
metadata:
  name: my-nfd-deployment
  namespace: nfd
EOF

Deployment Templates

The template specs provided in the repo can be used directly:

kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/node-feature-discovery/master/nfd-master.yaml.template
kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/node-feature-discovery/master/nfd-worker-daemonset.yaml.template

This will required RBAC rules and deploy nfd-master (as a deployment) and nfd-worker (as a daemonset) in the node-feature-discovery namespace.

Alternatively you can download the templates and customize the deployment manually.

Master-Worker Pod

You can also run nfd-master and nfd-worker inside the same pod

kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/node-feature-discovery/master/nfd-daemonset-combined.yaml.template

This creates a DaemonSet runs both nfd-worker and nfd-master in the same Pod. In this case no nfd-master is run on the master node(s), but, the worker nodes are able to label themselves which may be desirable e.g. in single-node setups.

Worker One-shot

Feature discovery can alternatively be configured as a one-shot job. The Job template may be used to achieve this:

NUM_NODES=$(kubectl get no -o jsonpath='{.items[*].metadata.name}' | wc -w)
curl -fs https://raw.githubusercontent.com/kubernetes-sigs/node-feature-discovery/master/nfd-worker-job.yaml.template | \
    sed s"/NUM_NODES/$NUM_NODES/" | \
    kubectl apply -f -

The example above launces as many jobs as there are non-master nodes. Note that this approach does not guarantee running once on every node. For example, tainted, non-ready nodes or some other reasons in Job scheduling may cause some node(s) will run extra job instance(s) to satisfy the request.

Build Your Own

If you want to use the latest development version (master branch) you need to build your own custom image. See the Developer Guide for instructions how to build images and deploy them on your cluster.

Usage

NFD-Master

NFD-Master runs as a deployment (with a replica count of 1), by default it prefers running on the cluster's master nodes but will run on worker nodes if no master nodes are found.

For High Availability, you should simply increase the replica count of the deployment object. You should also look into adding inter-pod affinity to prevent masters from running on the same node. However note that inter-pod affinity is costly and is not recommended in bigger clusters.

NFD-Master listens for connections from nfd-worker(s) and connects to the Kubernetes API server to add node labels advertised by them.

If you have RBAC authorization enabled (as is the default e.g. with clusters initialized with kubeadm) you need to configure the appropriate ClusterRoles, ClusterRoleBindings and a ServiceAccount in order for NFD to create node labels. The provided template will configure these for you.

NFD-Worker

NFD-Worker is preferably run as a Kubernetes DaemonSet. This assures re-labeling on regular intervals capturing changes in the system configuration and mames sure that new nodes are labeled as they are added to the cluster. Worker connects to the nfd-master service to advertise hardware features.

When run as a daemonset, nodes are re-labeled at an interval specified using the --sleep-interval option. In the template the default interval is set to 60s which is also the default when no --sleep-interval is specified. Also, the configuration file is re-read on each iteration providing a simple mechanism of run-time reconfiguration.

TLS authentication

NFD supports mutual TLS authentication between the nfd-master and nfd-worker instances. That is, nfd-worker and nfd-master both verify that the other end presents a valid certificate.

TLS authentication is enabled by specifying --ca-file, --key-file and --cert-file args, on both the nfd-master and nfd-worker instances. The template specs provided with NFD contain (commented out) example configuration for enabling TLS authentication.

The Common Name (CN) of the nfd-master certificate must match the DNS name of the nfd-master Service of the cluster. By default, nfd-master only check that the nfd-worker has been signed by the specified root certificate (--ca-file). Additional hardening can be enabled by specifying --verify-node-name in nfd-master args, in which case nfd-master verifies that the NodeName presented by nfd-worker matches the Common Name (CN) of its certificate. This means that each nfd-worker requires a individual node-specific TLS certificate.

Configuration

NFD-Worker supports a configuration file. The default location is /etc/kubernetes/node-feature-discovery/nfd-worker.conf, but, this can be changed by specifying the--config command line flag. Configuration file is re-read on each labeling pass (determined by --sleep-interval) which makes run-time re-configuration of nfd-worker possible.

Worker configuration file is read inside the container, and thus, Volumes and VolumeMounts are needed to make your configuration available for NFD. The preferred method is to use a ConfigMap which provides easy deployment and re-configurability. For example, create a config map using the example config as a template:

cp nfd-worker.conf.example nfd-worker.conf
vim nfd-worker.conf  # edit the configuration
kubectl create configmap nfd-worker-config --from-file=nfd-worker.conf

Then, configure Volumes and VolumeMounts in the Pod spec (just the relevant snippets shown below):

...
  containers:
      volumeMounts:
        - name: nfd-worker-config
          mountPath: "/etc/kubernetes/node-feature-discovery/"
...
  volumes:
    - name: nfd-worker-config
      configMap:
        name: nfd-worker-config
...

You could also use other types of volumes, of course. That is, hostPath if different config for different nodes would be required, for example.

The (empty-by-default) example config is used as a config in the NFD Docker image. Thus, this can be used as a default configuration in custom-built images.

Configuration options can also be specified via the --options command line flag, in which case no mounts need to be used. The same format as in the config file must be used, i.e. JSON (or YAML). For example:

--options='{"sources": { "pci": { "deviceClassWhitelist": ["12"] } } }'

Configuration options specified from the command line will override those read from the config file.

Currently, the only available configuration options are related to the CPU, PCI and Kernel feature sources.

Using Node Labels

Nodes with specific features can be targeted using the nodeSelector field. The following example shows how to target nodes with Intel TurboBoost enabled.

apiVersion: v1
kind: Pod
metadata:
  labels:
    env: test
  name: golang-test
spec:
  containers:
    - image: golang
      name: go1
  nodeSelector:
    feature.node.kubernetes.io/cpu-pstate.turbo: 'true'

For more details on targeting nodes, see node selection.

Uninstallation

Operator Was Used for Deployment

If you followed the deployment instructions above you can simply do:

kubectl -n nfd delete NodeFeatureDiscovery my-nfd-deployment

Optionally, you can also remove the namespace:

kubectl delete ns nfd

See the node-feature-discovery-operator and OLM project documentation for instructions for uninstalling the operator and operator lifecycle manager, respectively.

Manual

NFD_NS=node-feature-discovery
kubectl -n $NFD_NS delete ds nfd-worker
kubectl -n $NFD_NS delete deploy nfd-master
kubectl -n $NFD_NS delete svc nfd-master
kubectl -n $NFD_NS delete sa nfd-master
kubectl delete clusterrole nfd-master
kubectl delete clusterrolebinding nfd-master

Removing Feature Labels

NFD-Master has a special --prune command line flag for removing all nfd-related node labels, annotations and extended resources from the cluster.

kubectl apply -f https://raw.githubusercontent.com/kubernetes-sigs/node-feature-discovery/master/nfd-prune.yaml.template
kubectl -n node-feature-discovery wait job.batch/nfd-prune --for=condition=complete && \
    kubectl -n node-feature-discovery delete job/nfd-prune

NOTE: You must run prune before removing the RBAC rules (serviceaccount, clusterrole and clusterrolebinding).