Trim illegal characters from the beginning and end of the kernel version
string. Label values must start and end with an alphanumeric and we want
to have some 'version.full' label, even if a sanitized one.
Skip to the next rule instead of returning immediately on
rule errors. For instance, if the static rules failed, user
provided rules would never be processed.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
This provides support for 32-bit ARM cpuid capabilities based on
the HWCAP flags, and enables the build of NFD on the 32-bit ARM
userland - notably, this also applies to ARM64 systems that are
running userspace in Aarch32 mode, which is where this problem
was first encountered.
Signed-off-by: Paul Mundt <paul.mundt@adaptant.io>
Instead of relying on golang "net" package, use the configured host
sysfs for all discovery. No need to use hostNetwork after that so drop
it from the worker deployment templates.
Extend the FeatureSource interface with new methods for configuration
handling. This enables easier on-the fly reconfiguration of the
feature sources. Further, it simplifies adding config support to feature
sources in the future. Stub methods are added to sources that do not
currently have any configurability.
The patch fixes some (corner) cases with the overrides (--options)
handling, too:
- Overrides were not applied if config file was missing or its parsing
failed
- Overrides for a certain source did not have effect if an empty config
for the source was specified in the config file. This was caused by
the first pass of parsing (config file) setting a nil pointer to the
source-specific config, effectively detaching it from the main config.
The second pass would then create a new instance of the source
specific config, but, this was not visible in the feature source, of
course.
This builds on the PCI support to enable the discovery of USB devices.
This is primarily intended to be used for the discovery of Edge-based
heterogeneous accelerators that are connected via USB, such as the Coral
USB Accelerator and the Intel NCS2 - our main motivation for adding this
capability to NFD, and as part of our work in the SODALITE H2020
project.
USB devices may define their base class at either the device or
interface levels. In the case where no device class is set, the
per-device interfaces are enumerated instead. USB devices may
furthermore have multiple interfaces, which may or may not use the
identical class across each interface. We therefore report device
existence for each unique class definition to enable more fine-grained
labelling and node selection.
The default labelling format includes the class, vendor and device
(product) IDs, as follows:
feature.node.kubernetes.io/usb-fe_1a6e_089a.present=true
As with PCI, a subset of device classes are whitelisted for matching.
By default, there are only a subset of device classes under which
accelerators tend to be mapped, which is used as the basis for
the whitelist. These are:
- Video
- Miscellaneous
- Application Specific
- Vendor Specific
For those interested in matching other classes, this may be extended
by using the UsbId rule provided through the custom source. A full
list of class codes is provided by the USB-IF at:
https://www.usb.org/defined-class-codes
For the moment, owing to a lack of a demonstrable use case, neither
the subclass nor the protocol information are exposed. If this
becomes necessary, support for these attributes can be trivially
added.
Signed-off-by: Paul Mundt <paul.mundt@adaptant.io>
Some Kernel versions include symbols such as "+".
Yocto L4T kernel is an example of this behaviour.
To fix this error all unknown symbols are replaced by an underscore.
Signed-off-by: Pablo Rodriguez <paroque28@gmail.com>
- Implement the 'custom' feature source utilizing the
match rules implemented in previous commit.
- Add a static custom feature list for:
1. rdma.capable - marks a node where devices that support
RDMA are present.
2. rdma.enabled - marks a node where rdma modules have
been loaded.
A user may extend these features with additional match rules via
NFD configuration file.
- Add a Rule interface to help describe the contract
between a match rule and the Custom source that uses it.
- Add PciIdRule - a rule that matches on the PCI attributes:
class, vendor, device. Each is provided as a list of elements(strings).
Match operation: OR will be performed per element and AND will be
performed per attribute.
An empty attribute will not be included in the matching process.
Example:
{
"class": ["0200"]
"vendor": ["15b3"]
"device": ["1014", "1016"]
}
- Add LoadedKmodRule - a rule that matches a list of kernel
modules with the kernel modules currently loaded in the node.
Example:
{
["rdma_cm", "ib_core"]
}
This will enable code reuse across sources while preventing
packages which are not under 'source' to import it.
subsequent commits will introduce the 'custom' source which
will use the logic.
SR-IOV is a PCI attribute and also non-NIC PCI devices can have it. Therefore,
it is useful to label all PCI devices with that capability.
After this commit the following labels for Intel NICs are overlapping:
feature.node.kubernetes.io/pci-0200_8086.sriov.capable=true
feature.node.kubernetes.io/network-sriov.capable=true
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Some workloads may benefit from Intel Turbo Boost technology being
disabled. This patch sets the
'feature.node.kubernetes.io/cpu-pstate.turbo' label to 'false' if we can
detect that it has been disabled. If detection fails no label is
published.
Extend NVDIMM (non-volatile DIMM) discovery by adding detection of DAX
mode, i.e. detection of regions in DAX/AppDirect mode.
The new label is:
feature.node.kubernetes.io/memory-nv.dax: true
Add 'cpuid/attributeBlacklist' and 'cpuid/attributeWhitelist' config
options for the cpu feature source. These can be used to filter the set
of cpuid capabilities that get published. The intention is to reduce
clutter in the NFD label space, getting rid of "obvious" or misleading
cpuid labels. Whitelisting has higher priority, i.e. only whitelist
takes effect if both attributeWhitelist and attributeBlacklist are
specified.
Remove 'cpuid', 'pstate' and 'rdt' feature sources and move their
functionality under the 'cpu' source. The goal is to have a more
systematic organization of feature sources and labels. After this change
we now basically have one source per type of hw, one for kernel and one
for userspace sw.
Related feature labels are changed, correspondingly, new labels being:
feature.node.k8s.io/cpu-cpuid.<cpuid flag>
feature.node.k8s.io/cpu-pstate.turbo
feature.node.k8s.io/cpu-rdt.<rdt feature>
Detect of the Intel SST-BF (Speed Select Technology - Base Frequency)
has been enabled.
Adds one new feature label:
feature.node.kubernetes.io/cpu-power.sst_bf.enabled=true
Based on a patch from kuralamudhan.ramakrishnan@intel.com
Add a new Makefile target for regenerating these files. Also, add a
note that the files are auto-generated, including instructions how to
re-generate them.
Renames the mock files, using the defaults provided by the mockery tool,
in order to make their generation easier.
The aim here is to add another way to specify labels using the local
source by reading files in a specific directory. That avoids us to
execute a hook when we just need to get the content of a file.
See https://github.com/kubernetes-sigs/node-feature-discovery/issues/226
Signed-off-by: Jordan Jacobelli <jjacobelli@nvidia.com>
Get rid of the dependency on intel-cmt-cat library and rdt helper
binaries written in C. Significantly simplifies the build procedure.
Implements minimal support (in assembler) for getting the raw data from
the CPUID instruction. Also, implement a stub so that the code works on
other architectures than amd64, too.
Discover other than bool or tristate kconfig options, too. For bool and
tristate the node label is still binary (i.e. set to "true" if the
kconfig option has been enabled). For other kconfig types (e.g. string
or int) the value of the label directly corresponds to the value of the
kconfig flag, e.g. "32", "elf64-x86-64" etc.
Add two new attributes 'VERSION_ID.major' and 'VERSION_ID.minor' to the
os_release feature. These represent the first two components of
the OS version (version components are assumed to be separated by a
dot). E.g. if VERSION_ID would be 1.2.rc3 major and minor versions would
be 1 and 2, respectively:
feature.node.kubernetes.io/system-os_release.VERSION_ID=1.2.rc3
feature.node.kubernetes.io/system-os_release.VERSION_ID.major=1
feature.node.kubernetes.io/system-os_release.VERSION_ID.minor=2
The version components must be purely numerical in order for them to be
advertised. This way they can be fully (and reliably) utilized in
nodeAffinity, including relative (Gt and Lt) operators.
Remove the 'selinux' feature source and move the functionality under the
'kernel' feature source. The selinux feature label is changed to
feature.node.kubernetes.io/selinux.enabled
The selinux feature source was rather narrow in scope, and, the sole
feature it advertised naturally falls under the kernel feature source.
Currently, it only detects one feature, i.e. hardware multithreading
(such as Intel hyper-threading technology). The corresponding feature
label is:
feature.node.kubernetes.io/cpu-hardware_multithreading=true
However, this (architecture/platform dependent) feature is not detected
directly, and, the heuristics can be mislead. Detection works by
checking the thread siblings of each logical (and online) cpu in the
system. If any cpu has any thread siblings the feature label is set to
true. Thus, hardware multithreading could be effectively disabled e.g.
by putting all sibling cpus offline (even if the technology would be
enabled in hardware).
Implement new 'system' feature source. It now detects OS release
information from the os-release file, assumed to be available at
/host-etc/os-release. It currently creates two labels (assuming that the
corresponding fields are found in the os-release file), with example
values:
feature.node.kubernetes.io/system-os_release.ID=opensuse
feature.node.kubernetes.io/system-os_release.VERSION_ID=42.3
Also, update the template spec to mount /etc/os-release file from the
host inside the container.
This implementation only detects kconfig options ("NO_HZ", "NO_HZ_IDLE",
"NO_HZ_FULL" and "PREEMPT"). The corresponding node labels will be
node.alpha.kubernetes-incubator.io/nfd-kernel-config.<option name>
Currently, only bool and tristate (i.e. '=y' or '=m') kernel config
options are supported. Other kconfig types (e.g. string or int) are
simply ignored. If the kconfig flag is set to '=y' or '=m', the
corresponding node label will be present and it's value will be 'true'.
Make it possible for the hooks to fully define the label name to be used
(i.e. without the '<hook name>-' prefix) by prefixing the printed
feature names with a slash ('/'). This makes it possible to e.g.
override labels create by other sources.
For example having the following output from a hook:
/override_source-override_bool
/override_source-override_value=my value
will translate into the following feature labels:
feature.node.kubernetes.io/override_source-override_bool = true
feature.node.kubernetes.io/override_source-override_value = my value
Make the feature detector hooks, run by the 'local' feature source,
support non-binary label values. Hooks can advertise non-binary value by
using <name>=<value> format.
For example, /etc/kubernetes/node-feature-discovery/source.d/myhook
having the following stdout:
LABEL_1
LABEL_2=foobar
Would translate into the following labels:
feature.node.kubernetes.io/myhook-LABEL_1 = true
feature.node.kubernetes.io/myhook-LABEL_2 = foobar
Implement a new feature source named 'local' whose only purpose is to
run feature source hooks found under
/etc/kubernetes/node-feature-discovery/source.d/ It tries to execute all
files found under the directory, in alphabetical order.
This feature source provides users a mechanism to implement custom
feature sources in a pluggable way, without modifying nfd source code or
Docker images.
The hooks are supposed to print all discovered features in stdout, one
feature per line. The output in stdout is used in the node label as is.
Full node label name will have the following format:
feature.node.kubernetes.io/<hook name>-<feature name>
Stderr from the hooks is propagated to nfd log.
Add a new 'kernel' feature source, detecting the kernel version. The
kernel version is split into multiple labels in order to make this more
usable in label selectors. Kernel version in the format X.Y.Z-patch will
be presented as
node.alpha.kubernetes-incubator.io/nfd-kernel-version.full=X.Y.Z-patch
node.alpha.kubernetes-incubator.io/nfd-kernel-version.major=X
node.alpha.kubernetes-incubator.io/nfd-kernel-version.minor=Y
node.alpha.kubernetes-incubator.io/nfd-kernel-version.revision=Z
The '.full' label will always be avaiable. The other labels if these
components can be parsed from the kernel version number.
Add new config option for specifying the device label, i.e. the
<device-label> part in
node.alpha.kubernetes-incubator.io/nfd-pci-<device label>.present
The option is a list of field names:
"class" PCI device class
"vendor" Vendor ID
"device" Device ID
"subsystem_vendor" Subsystem vendor ID
"subsystem_device" Subsystem device ID
E.g. the following command line flag can be used to use all of the
above:
--options='{"sources": {"pci": {"deviceLabelFields": ["class", "vendor", "device", "subsystem_vendor", "subsystem_device"] } } }'
User can now configure the list of device classes to detect, either via
a configuration file or by using the --options command line flag.
An example of a command line flag to detect all network controllers and
("main class 0x02) and VGA display controllers ("main" class 0x03 and
subclass 0x00) would be:
--options='{"sources": {"pci": {"deviceClassWhitelist": ["02", "0300"] } } }'
This feature source detects the presence of PCI devices. At the moment,
it only advertises GPUs and accelerator cards, i.e. device classes 0x03,
0x0b40 and 0x12.
The label format is:
node.alpha.kubernetes-incubator.io/nfd-pci-<device label>.present
where <device label> is composed of raw PCI IDs:
<class id>_<vendor id>
Introduce a new scheme where features may have logical sub-components.
Rename sriov labels from the network source according to the new
pattern:
sriov -> sriov.capable
sriov-configured -> sriov.configured
Also, document this new labeling scheme in the README.
Signed-off-by: Markus Lehtonen <markus.lehtonen@intel.com>
* Arrange feature sources alphabetically
Just a cosmetic change, but, a small readability improvement.
* Implement detection of IOMMU (#136)
Add a new feature source, i.e. 'iommu', which detects if an IOMMU is
present and enabled in the kernel. The new node label is
node.alpha.kubernetes-incubator.io/nfd-iommu-present
This commit:
- enables node-feature-dicovery to advertise selinux status
on the node by adding a label.
- update the template to mount /sys into the container, this is
needed to know about the selinux status on the host
- adds selinux source for unit tests
This change adds feature source "storage".
Add label if any non-rotational block device is present in the node.
The label will be: nfd-storage-nonrotationaldisk=true
* Make rdt-discovery buildable outside hardcoded path
Do not assume that nfd sources always reside under hardcoded directory
"/go/src/github.com/kubernetes-incubator/node-feature-discovery/". This
makes it possible e.g. to build nfd locally outside the Docker
container.
* Do not hardcode the path for RDT helper binaries
Utilize the standard PATH env variable, instead.
* Format main,fake,network go source to improve GoReportCard
Order of import changed in main.go and network.go,
missing ending newline added in fake.go
* Fixed simple golint suggestions in multiple files
Mostly about missing or incomplete comments
* Adding SR-IOV capability discovery to node-feature-discovery
* SR-IOV capability discovery in NFD : code update after PR review
- using hostnetwork instead of volume mount in file node-feature-discovery-job.json.template
- iterating through network interfaces that are "up" in sources.go
- inserting logs in sources.go
- change in feature source name from "netid" to "network" in sources.go, README.md and main.go
* Added code for labels sriov=true (sriov_totalvfs > 0) and sriov-configured=true (sriov_numvfs > 0)
* Code Refactored: Added Network package and network.go
