`nix-doc-munge` can't handle these, which is understandable as I can
barely handle them either. There are a few infelicities here: the
current processor can't handle multiple terms to one description in
a description list so they get comma-separated in one case, and one
case that should ideally render as a `<figure>` with a `<figcaption>`
in HTML is reduced to a paragraph with some `<strong>` text. (Which, in
fairness, is how it rendered in practice with the DocBook anyway.) The
docs generator has since been updated to handle figures, but we can't
use it until moving off DocBook output.
These files all have options that trip up the `nix-doc-munge`
conversion tool for one reason or another (syntax that clashes with
Markdown, options that were already using Markdown syntax despite not
being marked that way, output that differs slightly after conversion,
syntax too elaborate to convert with some cheap regular expressions,
...). Translate them manually and do a little copyediting to options
in the vicinity while we're at it.
Output is mostly unchanged aside from some minor typographical and
formatting changes, along with better source links.
We temporarily export `options.docBookForMigration` to allow
`nix-doc-munge` to check its conversions.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
This removes the hard-coded fallback Home Manager paths. Specifically
${XDG_CONFIG_HOME:-$HOME/.config}/nixpkgs/home-manager
and
"$HOME/.nixpkgs/home-manager"
Use `@HOME_MANAGER_PATH@` if it has been provided and points to
something that exists. Warn the user if it does not point to
something.
If we have not been provided with a `@HOME_MANAGER_PATH@` that exists,
then for both hard-coded paths show a warning if something exists
where the paths are pointing.
This no longer attempts to use either of the hard-coded paths as
fallback for the Home Manager path.
Prior to this change, it was impossible to nest attrsets in
accounts.email.accounts.<name>.imapnotify.extraConfig. However,
goimapnotify's configuration is JSON-based, and the recommended
configuration has:
```
"tlsOptions": {
"rejectUnauthorized": true
},
```
This change changes the type from an attrset of str/int/bool to the
JSON type provided by nixpkg's `pkgs.formats.json`.
Previously, lines in .zshrc were added with quotes in keys
(e.g. ZSH_HIGHLIGHT_STYLES['comment']='fg=#6c6c6c'). However, zsh
considered these quotes to be part of the key, so the "comment" key
remained unchanged.
* home-cursor.nix: enable gtk module when enabling gtk config generation
The gtk configurations are not generated unless config.gtk is enabled.
This is a point of confusion because config.home.pointerCursor.gtk can essentially be disabled,
despite having it enabled.
* home-cursor.nix: Add note to gtk config generation description instead of enabling gtk module
* home-cursor.nix: Add note about applying pointerCursor configs to main submodule desc
* home-cursor.nix: Change tabs to spaces
* aerc: fix per-account extraConfig section names
The aerc configuration file `aerc.conf` can contain 10 different
sections, but only the UI section supports what the aerc manual calls
contextual configuration. This works by appending to the section heading
either `:account=name` or `:folder=bar`.
The aerc-accounts module, however, applied `mkAccountConfig` to each
section heading declared in
`config.accounts.email.accounts.<name>.aerc.extraConfig.*`. This means
home-manager will generate files with `[general:account=default]` and
the options will not be recognized by aerc.
To address this, and since it doesn't make sense for other sections to
only be under a single account's scope, an assertion has been added
to confirm that only sectons that support contextual config (i.e.,
only the UI section) is declared.
This also addresses confusions like declaring
`accounts.email.accounts.*.aerc.extraConfig.general.unsafe-accounts-conf
= true` and triggering a warning message because
`programs.aerc.extraConfig.general.unsafe-accounts-conf` was unset.
This commit also updated documentation throughout the aerc modules to
be in line with this change, and fixed minor typos/formatting therein.
Co-authored-by: Genevieve <genevieve@sunlashed.garden>
* aerc: make assertion plaintext and add test case
This commit adds a test case to check both the warning on unset
`unsafe-accounts-conf = true` when aerc accounts are configured
with Nix, and the new assertion when per-account configuration
contains unsupported subsections (i.e. general).
It also fixes minor formatting issues and typos.
As pointed out in #3291, using the XDG symlink means the agent/unit
files don’t change when the contents of the config changes, and so the
service will not be restarted.
Nushell has the option to source from the login.nu file in the case
that nushell is used as a login shell. This commit adds the login file
alongside the existing config and env files as another configuration
option.
Previously, IMAP was preferred over notmuch, even if notmuch was
configured, causing problems with setting account flavor (which
automatically sets IMAP settings). The new backend order is:
notmuch > IMAP > maildir
This also fixes the notmuch DB path being set to the wrong location.
The notmuch DB is located at the maildir base path, not in each
account's maildir.
Unison supports the same option to be given several times as a command
line argument (e.g. unison -path xxx -path yyy).
This commit adds Home Manager support for this by allowing a list of
strings to be given to services.unison.pairs.<name>.commandOptions values.
# Veuillez saisir le message de validation pour vos modifications. Les lignes
* imapnotify: expose package (and exe) options
There are multiple packages that provide an imapnotify interface. Those
packages have differently named executables. This can now be customized.
This change also means test configurations can use stub packages.
* imapnotify: use/create config in configHome
Exposing the configuration file makes testing imapnotify configurations much
easier. It also allows for golden tests in home-manager.
* imapnotify: extend with launchd agent
Now that home-manager supports launchd agents, the imapnotify service
can be configured (and enabled) for darwin. The configuration matches
that of the linux/systemd version. In particular, by not setting a
`UserName`, this runs as the user whose configuration includes the
module.
Due to the launchd `Program` implementation (it must take an absolute
path) it is not possible to use that for the program and stub the path
in tests. Instead, this uses `ProgramArguments` for the program name.
The `ThrottleInterval` is equivalent to `RestartSec`. `KeepAlive` is
equivalent to `Restart`.
The `ExitTimeOut` default is 20 seconds, but goimapnotify should not
time out — this is achieved by setting the `ExitTimeout` to 0.
* imapnotify: add launchd plist test
This only tests the generated plist (which is new), not the original
systemd implementation, nor the json config file.
(Note the lack of a newline at the end of the plist file.)
This will reduce the system closure size by about 200MB under NixOS by
sharing the glibcLocales package.
When home-manager is installed on Linux without the NixOS module, all
glibc locales are installed, as before.
Resolves: #2333
The current `lla` alias, together with the `total-size` option try to get
the size of the `..` directory, and for this has to recursively open all
sibling folders. This may be super slow if some of those siblings
contain too many files, and raise a ton of useless errors if some of
those siblings contains non-readable files.
I'm suggesting to use `-A` instead, which will skip the obvious `.` and
`..` folders.
While here, I think we could also add `llt`.
Many of the terminals supported inside emacs work perfectly fine with STARSHIP.
The TERM=dumb case already handles the tramp and eterm cases, so as far as I can
tell, this is basically just a check for the benefit of OLD versions of
term-mode (see
emacswiki.org/emacs/AnsiTerm#:~:text=Historically%2C%20'M%2Dx%20ansi%2Dterm,the%20older%20'C%2Dc'%20binding.,
which indicates that it also now handles colors).
PR #3747 renamed the option wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable.
This commit simply updates documentation to reference the new format.
Starship has an advanced, experimental feature where fancy stuff in the
prompt can be replaced with something more simple after the command is
ran. This is very helpful for copy and pasting shell history somewhere
else.
docs: https://starship.rs/advanced-config/#transientprompt-and-transientrightprompt-in-fish
Fish is currently the only shell as far as I can tell that both
home-manager and starship support for this feature. Since the function
has to be called after starship is loaded, this seems like the best
place to put it.
format
* qt: always apply qt.style.package
Before this commit this was only being applied if `qt.platformName` was
set to "gnome". With this change we will always apply the package.
* qt: only set ~/config/Trolltech.conf in GTK or GNOME
* qt: add qtstyleplugin-kvantum-qt4 and qt6Packages.qtstyleplugin-kvantum
qt: add qtstyleplugin-kvantum-qt4
* news: add news entry about the qt module refactors
* qt: add thiagokokada as maintainer
* qt: add "qtct" to qt.platformTheme
This allows usage of qt5ct/qt6ct tool to configure Qt theme/icons/fonts
in non-KDE platforms.
* qt: add missing relatedPackages for qt.platformTheme = "kde"
* qt: add "kvantum" for qt.styles.name
This allow you to configure Qt integration using KDE instead of
qgnomeplatform or qtstyleplugins. Useful if your theme supports both GTK
and KDE, for example Nordic.
To use this properly you will need to do some manual configuration for
now. You can set the theme settings using `~/.config/kdeglobals`.
Example:
```nix
{ ... }:
{
qt = {
enable = true;
platformTheme = "kde";
};
xdg = {
configFile.kdeglobals.text = lib.generators.toINI { } {
General = {
ColorScheme = "nordicbluish";
Name = "nordic-bluish";
shadeSortColumn = true;
};
Icons = {
Theme = "Nordic-bluish";
};
KDE = {
LookAndFeelPackage = "Nordic-bluish";
contrast = 4;
};
};
dataFile = {
# For General.ColorScheme
color-schemes = {
source = "${pkgs.nordic}/share/color-schemes";
recursive = true;
};
# For KDE.LookAndFeelPackage
plasma = {
source = "${pkgs.nordic}/share/plasma";
recursive = true;
};
};
};
}
```
* aerc: add space after definitions
* aerc: only generate files, if options were set
* aerc: improve file permission warning
* aerc: remove redundant access to builtins
* aerc: allow overwriting of derived values
the order of merging the config subsets did not allow the user to specify
outgoing, source and password command values,
if they were previously derived from the SMTP, IMAP, Maildir etc config.
The values from `account.<name>.extraAccounts` now have the highest precedence.
Appropriate tests were added as well.
* aerc: write primary account first
* Add infrastructure for contacts and calendars
This also adds the modules
- programs.vdirsyncer,
- programs.khal, and
- services.vdirsyncer
that integrate with the new infrastructure.
Co-authored-by: Andrew Scott <3648487+ayyjayess@users.noreply.github.com>
Co-authored-by: Sebastian Zivota <sebastian.zivota@mailbox.org>
wip
* vdirsyncer: allow option userName, disallow userNameCommand
1. account option `userName` is now allowed by `programs.vdirsyncer`
2. The commented out account option `userNameCommand` was required to be set
by `programs.vdirsyncer` (e.g. as `null`).
It is now disallowed (commented out) by vdirsyncer.
* khal: added options 'color' and 'priority'
* Apply nixfmt
---------
Co-authored-by: Sebastian Zivota <sebastian.zivota@mailbox.org>
Co-authored-by: Johannes Rosenberger <johannes.rosenberger@jorsn.eu>
Co-authored-by: Johannes Rosenberger <johannes@jorsn.eu>
Co-authored-by: Robert Helgesson <robert@rycee.net>
* sway: add support for XDG autostart using systemd
Using the option wayland.windowManager.sway.systemd.xdgAutostart, users
can now choose to start applications present in
$XDG_CONFIG_HOME/autostart when starting their sway session.
This change also renames wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable;
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* sway: add Scrumplex to maintainers
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
---------
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* boxxy: add module
* boxxy: added nikp123 to maintainers list
* boxxy: use mkPackageOption instead for the package
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: use yaml generator instead of json
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: various fixes
* boxxy: various fixes (part 2)
* boxxy: various fixes (part 3)
* boxxy: various fixes (part 4)
forgot to run ./format, whoops
* boxxy: use literalExpression for the rewrite example
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: add news entry
---------
Co-authored-by: Naïm Favier <n@monade.li>
* Revert "maintainers: add rasmus-kirk as a maintainer"
This reverts commit 301b364892.
* Revert "joshuto: add the joshuto file manager"
This reverts commit e7fdcb40b2.
* Fix espanso module to work with 2.x version
* espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and
`match` folder.
* Espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and `match` folder.
Add descriptions
* Add versionAtLeast and mkRemovedOptionModule
* Correct maintainers list
* remove config key from example
* format basic-configuration.nix
* Update modules/services/espanso.nix
Co-authored-by: Naïm Favier <n@monade.li>
* fix maintainers list
---------
Co-authored-by: Naïm Favier <n@monade.li>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
* home-environment: add `home.sessionVariablesPackage`
Allow the `hm-session-vars.sh` derivation to be referenced from other
modules, e.g. to translate it to fish with babelfish at build time.
* fish: use babelfish for `hm-session-vars.sh`
Translate `hm-session-vars.sh` to fish at system build time,
significantly decreasing shell startup time.
Based on https://github.com/NixOS/nixpkgs/pull/108947 by @kevingriffin.
This is backwards compatible and allows for more flexibility(eg.
allows for defining custom waybar modules in separate nixos modules,
before merging them together)
Co-authored-by: mae <git@badat.dev>
Make use of the recently added nullable `mkPackageOption` feature
to disable installing an SSH client by default: most people should use
the client provided by their system.
The generation activation script should be run by the user specified
in `home.username` and `home.homeDirectory`. If some other user runs
the activation script, then files may end up in the wrong place or
with the wrong owner.
This commits adds a check early in the activation script that verifies
that the running user match the user in the configuration.
Fixes#4019
Kitty provides integrations for bash, fish and zsh. The new
programs.kitty.shellIntegration options allow the configuration of
these integrations.
See <https://sw.kovidgoyal.net/kitty/shell-integration> for more details.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* zellij: adds options to integrate with zsh, bash and fish shells
* zellij: add tests for shell integration options
* zellij: eval setup auto start for fish integration
* zellij: use interactiveShellInit for fish integration
* zellij: fixes format issues
* zellij: enable shell integrations by default
* zellij: compresses shell integration test cases
* zellij: removes the disabled shell integration tests
* zellij: formats tests
* pass-secret-service: Add dbus file, assert
Add the dbus service file in the package folder to XDG_DATA_HOME, as
well as adding an assertion to ensure both it and `gnome-keyring` aren't
enabled at the same time.
* pass-secret-service: Add self to CODEOWNERS
* pass-secret-service: Call out conflicting module(s)
* pass-secret-service: Revert `storePath` change
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* pass-secret-service: Add password-store module default changes info
* pass-secret-service: Fix default info, modularize conflict checks
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* Revert "pass-secret-service: Fix default info, modularize conflict checks"
This reverts commit 851df4fe49.
* pass-secret-service: Fix default info
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* pass-secret-service: Indent `storePath` description
---------
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* himalaya: add soywod to maintainers
* himalaya: make the config safer
Also added two services and more tests.
* himalaya: fix doc + typos
* himalaya: use freeform
* himalaya: run ./format
* himalaya: make use of mkPackageOption
It's pretty common to need multiple bindings to
history-substring-search, since different terminals will send different
keys for up/down.
This does not break back-compatibility, and introduces a new test
The current zplug nixpkgs puts everything under `$out/`. It pollutes the nix
profile dir.
This is a breaking change. It depends on an change of the output path in the
nixpkgs zplug package.
Virtual mailboxes (described by Notmuch queries) can now configured for each account in NeoMutt.
Plus, it is possible to disable Notmuch section for a specific account.
Without this, even if you configure a preference for Electron apps to
use Ozone by setting `NIXOS_OZONE_WL=1`, GUI apps launched through
systemd user services use XWayland, since the variable is not set in
their environment.
This fixes that issue by importing it, like we do other variables.
The previous implementation tried to rename the tag named "default" to
the first tag in `cfg.tags`. This was a wrong approach because if a
tag with the same name already existed, the renaming failed and the
default tag would continue to exist.
The looking up of the default tag also contained a bug because it
should have used `by-name` in the path.
Before this change, the default config provided by this module wrote
an empty file to `$HOME/.config/avizo/config.ini`, which caused a
bunch of errors, as Avizo tries to read a 'group' from the ini file,
which fails.
This commit also adds associated test cases.
PR #3871
The added extraConfig option allowes users to insert custom text at
the end of the generated profile `user.js` file. This allows the users
to import templates as part of their configuration.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
The Nix profiles path may not exist right after installing Nix. In
that case, it is created on demand by the Nix CLI tools. However, Home
Manager assumes it exists and fails if it doesn't.
This change makes sure to trigger the creation of the Nix profiles
path before attempting to access it.
If the user runs a recent Nix version that places per-user profiles in
`$XDG_STATE_DIR/nix/profiles`, then migrate the home-manager profile
there.
Also clean up `setupVars` a bit.
While technically dconf on darwin could work, our activation step
requires dbus, which only *lightly* supports Darwin in general, and not
at all in the way it's packaged in nixpkgs. Because of this, we just
disable dconf for darwin hosts by default.
In the future, if someone gets dbus working, this _could_ be re-enabled,
unclear whether there's actual value in it though.
link the packpath in expected folder so that even unwrapped neovim can pick home-manager's plugins.
I sometimes need to run neovim not wrapped/configured by nix (when
developing neovim or when other projects bring their own neovim in
PATH). Currently they dont find plugins installed by home-manager in the
cases where packpath is not set to the generated nix packpath directory.
With this change, neovim can discover HM-installed plugins by itself.
Some of the email providers (like GMail and Fastmail) save Sent messages
automatically, so make the folders optional in the configuration.
Make Drafts folder optional as well, to allow it to be configured
manually in the extraConf with location outside of the maildir.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
* i3status-rust: update it to handle 0.30.x releases
0.30.0 is a major release that brings many breaking changes to the
configuration file. See:
https://github.com/greshake/i3status-rust/blob/master/NEWS.md#i3status-rust-0300
The only one that actually affects the module though is the change in
how the theme/icons are defined. Other changes are mostly on how to
specify formatting/blocks, and since we just generate the TOML as-is, it
needs changes in the user side.
So most changes in this commit are documentation updates, having
up-to-date examples from things that changed, e.g.: the new `click`
attribute that now can be applied to any block.
* i3status-rust: only use new format if i3status-rust >= 0.30.0
* news: document the i3status-rust changes
* i3status-rust: add thiagokokada as maintainer
The `XCURSOR_*` environment variables specified in libxcursor
are used by many applications and libraries to load and configure
cursor settings. Setting these variables is a no-op if ignored but
is useful as a fallback when other sources of configuration are
unreliable.
This commit sets some commonly used `XCURSOR_*` environment variables
(i.e XCURSOR_THEME, XCURSOR_SIZE) by default when `home.pointerCursor`
is enabled.
The init command is essentially the old install script but integrated
into the home-manager tool. This simplifies things slightly since we
can use the existing code infrastructure.
The init command is Nix flake aware in the sense that, if we detect
that the user's Nix setup supports flakes, then we also create an
initial `flake.nix` file.
Finally, we update the installation instructions for the Nix flakes
standalone setup to use the new init command.
Zsh completion update provided by Anund <anundm@gmail.com>.
This command adds the ability to specify lists of qutebrowser
commands as values for key bindings, which avoids the need for
concatenating commands with ` ;; `.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
This changes the default configuration location for Home Manager
configurations from
$XDG_CONFIG_HOME/nixpkgs
to
$XDG_CONFIG_HOME/home-manager
The old location is still supported but using it will trigger a
warning message.
Fixes#3640
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
Added a generator for the KDL document language.
This is in order for home-manager to natively generate
the new config format for zellij, as described in nix-community#3364.
There is not a one to one mapping between KDL and nix types,
but attrset translation is heavily based on KDLs JSON-IN-KDL microsyntax.
The exception here is the `_args` and `_props` arguments, which lets you
specify arguments and properties as described in the spec.
See more here:
- https://kdl.dev/
- https://github.com/kdl-org/kdl/blob/main/SPEC.md
The generator also conforms to the interface from the nixpkgs manual:
https://nixos.org/manual/nixpkgs/stable/#sec-generators
Co-authored-by: Gaetan Lepage <gaetan@glepage.com>
Specifically, if the global per-user profiles path do not exist and we
cannot create it during the activation, then place our profile in the
Home Manager data directory. We prefer to use the global location,
though, since it makes it visible to `nix-collect-garbage`.
This is intended to improve compatibility with Nix version 2.14 and
later, which no longer creates the per-user directories.
Also, use the Home Manager data directory to manage the gcroot for the
current generation. It does not have to sit in the global per-user
gcroots directory since it should never be eligible for GC.
If used inside the NixOS/nix-darwin module, we get conflicting definitions
of `name` inside the specialization: one is the user name coming from the
NixOS module definition and the other is `configuration`, the name of this
option. Thus we need to explicitly wire the former into the module arguments.
See discussion at https://github.com/nix-community/home-manager/issues/3716
* exa: add more options
* exa: use `escapeShellArgs`
* exa: don't hardcode executable path in aliases
Prevents aliases from going stale in open terminals when the system is updated.
* exa: use `command` for self-referential alias
Otherwise fish complains about the recursive call.
Drop the aliases from ion shell since it doesn't implement the POSIX
`command` built-in.
* exa: re-add ion aliases
* exa: drop `command`
Fish doesn't complain about recursion if `exa` isn't escaped.
---------
Co-authored-by: Naïm Favier <n@monade.li>
The `-X` prevents that screen is cleared when showing a diff that's
larger than my screen.
I.e. when running `git diff` and press `q`, the last thing I want to see
is the prompt with `git diff` and *not* the part of the diff I browsed,
to be clear
$ git diff
$ <cursor>
Considering that this is somewhat opinionated, I decided to build an
option which allows you to pass arbitrary commands to the less
invocation.
Xsession (and hence ~/.xsession) is executed in bash but does not set
SHELL to the full path to bash. In case the user's login shell is
something other than bash then SHELL is set to that shell. Keychain
inspects the SHELL variable to find out what shell it has to generate
code for, so in .xsession it generates code for the user's login shell
instead for bash.
This change forces SHELL to bash for keychain when invoked from
.xsession, the same way it's done when generating keychain's code for
bash integration.
Closes#3693
* vscode: add extensions.json file in extensions dir
This change generates an 'extensions.json` file the same way that
nixpkgs' vscode-with-extensions does, and makes sure it is placed in the
directory with the extensions.
* vscode: remove leftover trace
Co-authored-by: Naïm Favier <n@monade.li>
* vscode: fix adding extensions.json with mutable extension dir
Co-authored-by: Naïm Favier <n@monade.li>
* vscode: let vscode regenerate the mutable extensions.json
* Remove nixpkgs duplication; only apply on vscodes new enough to need it
* Use lib.versionAtLeast
Co-authored-by: Naïm Favier <n@monade.li>
* Format vscode.nix
---------
Co-authored-by: Naïm Favier <n@monade.li>
Allow modules to define systemd services on macOS. It won't actually
have any effect, but it would allow modules to define both systemd
services and launchd agents without boilerplate conditionals.
As a consequence of this change, each module would have to check for
compatibility with the OS target instead.
Internally we already managed them per-profile but exposed a global
option to maintain backwards compatibility. The benefit to having
per-profile extensions is quite large though, so it is time to switch.
Users of the global extensions option will get an error message that
indicates how to edit their configuration to work again.
Firefox internally only supports bool, int, and string types for
preferences, but often stores objects, arrays and floats as strings.
This change makes it nicer to specify those type of preferences in
Nix, and it also makes it possible to merge objects & arrays across
multiple modules.
This reflects a systemd service sample file change made in borgmatic
1.7.6, commit 2e9f70d49647d47fb4ca05f428c592b0e4319544:
When backing up a machine with a monitor using logind to control
idle timeout and things like DPMS, borgmatic can block the screen
from turning on/off with systemd-inhibit. This is because by
default systemd-inhibit will block
"idle:sleep:shutdown". Borgmatic does not need to care about idle,
only about suspend and shutdown. So, add an explicit `--what` flag
for what borgmatic should inhibit.
For more information see systemd-inhibit(1).
Some JVMs pass through `home` as a derivation rather than as a string, as `openjdk` does. Since the module option for session variables expects a string, this is a type error. I suspect that this incorrect, and have changed the assignment here to coerce the `cfg.package.home` attribute to a string to be safe.
After discussing with @NobbZ, we have decided it is best to mitigate this problem in HM rather than to make potentially breaking changes to Nixpkgs.
Please do mention if you think we ought to propose a change to Nixpkgs instead.
Allow setting the application package and storePath used by the
config. Since the `programs.password-store` Home Manager module sets
config values via global environment variables, the default behavior
of the module should continue to behave as before for the user.
Additionally,
- Adds a few tests.
- Use "escapeShellArg" function call to the path parameter call to
ensure paths with spaces work.
- Allow not setting storePath, which will cause `pass_secret_service`
to default to using `~/.password-store`.
- If `pass-secret-service` is enabled, set its store path to default
to the one defined in our password-store environment settings.
- Add myself (houstdav000) as maintainer.
Fish shell doesn't require arguments to `eval` to be double quoted
like in a bash shell. At the moment doing so gives us the following
error:
~/.config/fish/config.fish (line 12): $(...) is not supported. In fish, please use '(/nix/store/8asq…)'.
eval "$(/nix/store/8asqgnhs89wzyjvs8p1n5hvxn7lkn9wa-opam-2.1.3/bin/opam env --shell=fish)"
^
from sourcing file ~/.config/fish/config.fish
called during startup
source: Error while reading file “/home/user/.config/fish/config.fish”
This commit fixes the above error.
The default value of `programs.ncmpcpp.mpdMusicDir` is taken from
`services.mpd.musicDirectory` if the mpd module is enabled, which has
type `either path str`. `programs.ncmpcpp.mpdMusicDir` did not accept
`str` values, though, so an error was raised when the default value was
used and `services.mpd.musicDirectory` was set to a value of type `str`.
This commit changes the type of `programs.ncmpcpp.mpdMusicDir` to also
accept `str` to reflect the type of `services.mpd.musicDirectory`.
Fixes#3560
* home-environment: use `lazyAttrsOf` for `home.sessionVariables`
`attrs` has unreasonable merge semantics and is deprecated. `attrsOf`
doesn't support variables depending on each other as is recommended in
the option's description.
* home-environment: restrict `sessionVariables` type
The consumer is `toString`, but we don't want to accept e.g. lists.
Assigning to `programs.neovim.extraLuaPackages` a function taking a lua package set as input
and returning a list of packages, as described in the documentation,
threw an error because the rest of the code assumed that the value was always a plain list.
Using `lib.types.coercedTo`, we can accept such functions, as per the documentation,
as well as plain lists, which we then convert to a function ignoring its input argument.
We print a warning when a plain list is assigned, since the function
form is preferred, as it ensures that the right lua package set is used.
For the lua packages, we also get the lua package set from the
finalPackage, to make sure that we are always using the same package set
as the actual unwrapped neovim package being built.
For `programs.neovim.extraPythonPackages` I did the same.
I updated the test case so that we test both ways of setting these options.
This enables nushell integration by default for direnv, similar to
bash/zsh/fish. The slightly verbose way of setting this is to ensure
that peoples' existing nushell configuration isn't overwritten, only
appended to, as would be the case if we just used the integration
example from the nushell docs:
https://www.nushell.sh/cookbook/direnv.htmlCloses#3520
Previously the nushell module did not differentiate between Linux and
Darwin when deciding where to place config files, whereas nushell
does. This commit fixes that.
The default value for `xsession.windowManager.herbstluftwm.tags` is an
empty list, but the config file uses `builtins.head` on it, which causes
an error upon evaluation. With this change the tags configuration is
skipped if the list is empty.
The previous variant used IFD to generate the `JAVA_HOME` variable and relied on internal hooks of the `java` package, this failed for a user cross compiling their configuration.
This PR changes that and uses the `home` attribute, as documented in the very last sentence of the https://nixos.org/manual/nixpkgs/stable/#sec-language-java chapter.
The old trigger would actually never cause a restart since the path
doesn't change. With this change the trigger is now using the actual
configuration path in the Nix store, which depends on the content.
