36 KiB
steward
Command & Control systems that are either always online or occasionally available online. Similar to Servers or IOT platforms where the link for reaching them can be stable wire/fibre LAN connections, or not-always-connected satellite links or GSM connections, or devices available over WAN connections.
The idea behind Steward is to help out with exactly these issues, allowing you to handle the state of your servers/containers/nodes.
- steward
- What is it ?
- Overview
- Inspiration
- Why
- Publishing and Subscribing processes
- Terminology
- Features
- Howto
- Build and Run
- Options for running
- How to Run
- Message fields explanation
- How to send a Message
- Send to socket with netcat
- Sending a command from one Node to Another Node
- Example JSON for appending a message of type command into the
socket
file - Specify more messages at once do
- Send the same message to several hosts by using the toHosts field
- Send an Op Command message for process listing with custom timeout and amount of retries
- Send and Op Command to stop a subscriber on a node
- Send and Op Command to start a subscriber on a node
- Tail a log file on a node, and save the result of the tail centrally at the directory specified
- Example JSON for appending a message of type command into the
- Concepts/Ideas
- TODO
- Implements a replyOpts message field
- Implements a repeat and repeatInterval message field
- Split out the different opCmd's into it's own request types
- Move the processes map into it's own go routine
- Services at startup of Steward. Could be implemented by having a local folder of messages to go through at startup. What is needed
- A carrier type of message, that are able to forward a message on behalf of others, and are not directly ment for itself
- Workflow request type
- Add Op option the remove messages from the queue on nodes
- Disclaimer
What is it ?
Command And Control anything like Servers, Containers, VM's or others by creating and sending messages with methods who will describe what to do. Steward will then take the responsibility for making sure that the message are delivered to the receiver, and that the method specified are executed with the given parameters defined. An example of a message.
An example of a request method to feed into the system. All fields are explained in detail further down in the document.
[
{
"directory":"/var/cli/command_result/",
"fileName": "some-file-name.result",
"toNode": "ship1",
"methodArgs": ["bash","-c","sleep 5 & tree ./"],
"method":"REQCliCommand",
"replyMethod":"REQToFileAppend",
"ACKTimeout":5,
"retries":3,
"replyACKTimeout":5,
"replyRetries":3,
"methodTimeout": 10
}
]
If the receiver toNode
is down when the message was sent, it will be retried until delivered within the criterias set for timeouts
and retries
. The state of each message processed is handled by the owning steward instance where the message originated, and no state about the messages are handled in the message broker.
Since the initial connection from a Steward node is outbound towards the central message broker no inbound firewall openings are needed.
Overview
Send Request Methods to control your servers by passing a messages that will have guaranteed delivery based on the criteries set, and when/if the receiving node is available. The result of the method executed will be delivered back to you from the node you sent it from.
Examples of Request Methods:
- Any shell command or script of your own choice.
- HTTP Get.
- Tail log files.
Steward uses NATS as message passing architecture for the commands back and forth from nodes. Delivery is guaranteed within the criterias set. All of the processes in the system are running concurrently, so if something breaks or some process is slow it will not affect the handling and delivery of the other messages in the system.
A node can be a server running any host operating system, a container living in the cloud somewhere, a Rapsberry Pi, or something else that needs to be controlled that have an operating system installed.
Steward can be compiled to run on all major architectures like x86, amd64,arm64, ppc64 and more, with for example operating systems like Linux, OSX, Windows and Android.
Inspiration
The idea for how to handle processes, messages and errors are based on Joe Armstrongs idea behind Erlang described in his Thesis https://erlang.org/download/armstrong_thesis_2003.pdf.
Joe's document describes how to build a system where everything is based on sending messages back and forth between processes in Erlang, and where everything is done concurrently.
I used those ideas as inspiration for building a fully concurrent system to control servers or container based systems by passing messages between processes asynchronously to execute methods, handle errors, or handle the retrying if something fails.
Steward is written in programming language Go with NATS as the message broker.
Why
With existing solutions there is often either a push or a pull kind of setup to control the nodes.
In a push setup the commands to be executed is pushed to the receiver, but if a command fails because for example a broken network link it is up to you as an administrator to detect those failures and retry them at a later time until it is executed successfully.
In a pull setup an agent is installed at the Edge unit, and the configuration or commands to execute locally are pulled from a central repository. With this kind of setup you can be pretty certain that sometime in the future the node will reach it's desired state, but you don't know when. And if you want to know the current state you will need to have some second service which gives you that information.
In it's simplest form the idea about using an event driven system as the core for management of Edge units is that the sender/publisher are fully decoupled from the receiver/subscriber. We can get an acknowledge if a message is received or not, and with this functionality we will at all times know the current state of the receiving end.
Publishing and Subscribing processes
All parts of the system like processes, method handlers, messages, error handling are running concurrently.
If one process hangs on a long running message method it will not affect the rest of the system.
Publisher
- A message in valid format is appended to the in socket.
- The message is picked up by the system and put on a FIFO ringbuffer.
- The method type of the message is checked, a subject is created based on the content of the message, and a publisher process to handle the message type for that specific receiving node is started if it does not exist.
- The message is then serialized to binary format, and sent to the subscriber on the receiving node.
- If the message is expected to be ACK'ed by the subcriber then the publisher will wait for an ACK if the message was delivered. If an ACK was not received within the defined timeout the message will be resent. The amount of retries are defined within the message.
Subscriber
- The receiving end will need to have a subscriber process started on a specific subject and be allowed handle messages from the sending nodes to execute the method defined in the message.
- When a message have been deserialized, it will lookup the correct handler for the method type specified within the message, and execute that handler.
- If the output of the method called is supposed to be returned to the publiser it will do so by using the replyMethod specified, and pick up the next message in the queue.
All parts involved
Logical structure
TODO: Make a diagram here...
Terminology
- Node: Something with an operating system that have network available. This can be a server, a cloud instance, a container, or other.
- Process: A message handler that knows how to handle messages of a given subject concurrently.
- Message:
- Command: Something to be executed on the message received. An example can be a shell command.
- Event: Something that have happened. An example can be transfer of syslog data from a host.
Features
Error messages from nodes
- Error messages will be sent back to the central error handler upon failure on a node.
Tue Sep 21 09:17:55 2021, info: toNode: ship2, fromNode: central, method: REQOpProcessList: max retries reached, check if node is up and running and if it got a subscriber for the given REQ type
Message handling and threads
-
The handling of all messages is done by spawning up a process for handling the message in it's own thread. This allows us to down on the individual message level keep the state for each message both in regards to ACK's, error handling, send retries, and rerun of a method for a message if the first run was not successful.
-
Processes for handling messages on a host can be restarted upon failure, or asked to just terminate and send a message back to the operator that something have gone seriously wrong. This is right now just partially implemented to test that the concept works, where the action=no-action.
-
Publisher Processes on a node for handling new messages for new nodes will automatically be spawned when needed if it does not already exist.
-
Messages not fully processed or not started yet will be automatically rehandled if the service is restarted since the current state of all the messages being processed are stored on the local node in a key value store until they are finished.
-
All messages processed by a publisher will be written to a log file as they are processed, with all the information needed to recreate the same message if needed, or it can be used for auditing.
-
All handling down to the process and message level are handled concurrently. So if there are problems handling one message sent to a node on a subject it will not affect the messages being sent to other nodes, or other messages sent on other subjects to the same host.
-
Message types of both ACK and NACK, so we can decide if we want or don't want an Acknowledge if a message was delivered succesfully. Example: We probably want an ACK when sending some REQCLICommand to be executed, but we don't care for an acknowledge NACK when we send an REQHello event.
Timeouts and retries
-
Default timeouts to wait for ACK messages and max attempts to retry sending a message are specified upon startup. This can be overridden on the message level.
-
Timeouts can be specified on both the message, and the method.
- A message can have a timeout.
- If the method triggers a shell command, the command can have its own timeout, allowing process timeout for long/stuck commands, or for telling how long the command is supposed to run.
Example of a message with timeouts set:
[
{
"directory":"/some/result/directory/",
"fileName":"my-syslog.log",
"toNode": "ship2",
"methodArgs": ["bash","-c","tail -f /var/log/syslog"],
"replyMethod":"REQToFileAppend",
"method":"REQnCliCommandCont",
"ACKTimeout":3,
"retries":3,
"methodTimeout": 60
}
]
In the above example, the values set meaning:
- ACKTimeout : Wait 3 seconds for an ACK message.
- retries : If an ACK is not received, retry sending the message 3 times.
- methodTimeout : Let the bash command
tail -f ./tmp.log
run for 60 seconds before it is terminated.
Flags and configuration file
Steward supports both the use of flags/arguments set at startup, and the use of a config file.
- A default config file will be created at first startup if one does not exist
- The default config will contain default values.
- Any value also provided via a flag will also be written to the config file.
- If Steward is restarted, the current content of the config file will be used as the new defaults.
- If you restart Steward without any flags specified, the values of the last run will be read from the config file.
- If new values are provided via CLI flags, they will take precedence over the ones currently in the config file.
- The new CLI flag values will be written to the config, making it the default for the next restart.
- The config file can be edited directly, removing the need for CLI flag use.
- To create a default config, simply:
- Remove the current config file (or move it).
- Restart Steward. A new default config file, with default values, will be created.
Schema for the messages to send into Steward via the API's
- toNode :
string
- toNodes :
string array
- method :
string
- methodArgs :
string array
- replyMethod :
string
- replyMethodArgs :
string array
- ACKTimeout :
int
- retries :
int
- replyACKTimeout :
int
- replyRetries :
int
- methodTimeout :
int
- replyMethodTimeout :
int
- directory :
string
- fileName :
string
Request Methods
REQOpProcessList
Get a list of the running processes.
[
{
"directory":"test/dir",
"fileName":"test.result",
"toNode": "ship2",
"method":"REQOpProcessList",
"methodArgs": [],
"replyMethod":"REQToFileAppend",
}
]
REQOpProcessStart
Start up a process. Takes the REQ method to start as it's only argument.
[
{
"directory":"test/dir",
"fileName":"test.result",
"toNode": "ship2",
"method":"REQOpProcessStart",
"methodArgs": ["REQHttpGet"],
"replyMethod":"REQToFileAppend",
}
]
REQOpProcessStop
Stop a process. Takes the REQ method, receiving node name, kind publisher/subscriber, and the process ID as it's arguments.
[
{
"directory":"test/dir",
"fileName":"test.result",
"toNode": "ship2",
"method":"REQOpProcessStop",
"methodArgs": ["REQHttpGet","ship2","subscriber","199"],
"replyMethod":"REQToFileAppend",
}
]
REQCliCommand
Run CLI command on a node. Linux/Windows/Mac/Docker-container or other.
Will run the command given, and return the stdout output of the command when the command is done.
[
{
"directory":"some/cli/command",
"fileName":"cli.result",
"toNode": "ship2",
"method":"REQnCliCommand",
"methodArgs": ["bash","-c","docker ps -a"],
"replyMethod":"REQToFileAppend",
}
]
REQCliCommandCont
Run CLI command on a node. Linux/Windows/Mac/Docker-container or other.
Will run the command given, and return the stdout output of the command continously while the command runs. Uses the methodTimeout to define for how long the command will run.
[
{
"directory":"some/cli/command",
"fileName":"cli.result",
"toNode": "ship2",
"method":"REQnCliCommandCont",
"methodArgs": ["bash","-c","docker ps -a"],
"replyMethod":"REQToFileAppend",
"methodTimeout":10,
}
]
REQTailFile
Tail log files on some node, and get the result for each new line read sent back in a reply message. Uses the methodTimeout to define for how long the command will run.
[
{
"directory": "/my/tail/files/",
"fileName": "tailfile.log",
"toNode": "ship2",
"method":"REQTailFile",
"methodArgs": ["/var/log/system.log"],
"methodTimeout": 10
}
]
REQHttpGet
Scrape web url, and get the html sent back in a reply message. Uses the methodTimeout for how long it will wait for the http get method to return result.
[
{
"directory": "web",
"fileName": "web.html",
"toNode": "ship2",
"method":"REQHttpGet",
"methodArgs": ["https://web.ics.purdue.edu/~gchopra/class/public/pages/webdesign/05_simple.html"],
"replyMethod":"REQToFile",
"ACKTimeout":10,
"retries": 3,
"methodTimeout": 3
}
]
REQHello
Send Hello messages.
All nodes have the flag option to start sending Hello message to the central server. The structure of those messages looks like this.
[
{
"toNode": "central",
"method":"REQHello"
}
]
REQErrorLog
Method for receiving error logs for Central error logger.
This is not to be used by users. Use REQToFileAppend instead.
Request Methods used for reply messages
REQToConsole
Print the output of the reply message to the STDOUT where the receiving steward instance are running.
[
{
"toNode": "ship2",
"method":"REQOpProcessList",
"methodArgs": [],
"replyMethod":"REQToConsole",
}
]
REQToFileAppend
Append the output of the reply message to a log file specified with the directory
and fileName
fields.
[
{
"directory":"test/dir",
"fileName":"test.result",
"toNode": "ship2",
"method":"REQOpProcessList",
"methodArgs": [],
"replyMethod":"REQToFileAppend",
}
]
REQToFile
Write the output of the reply message to a file specified with the directory
and fileName
fields, where the writing will write over any existing content of that file.
[
{
"directory":"test/dir",
"fileName":"test.result",
"toNode": "ship2",
"method":"REQOpProcessList",
"methodArgs": [],
"replyMethod":"REQToFile",
}
]
ReqCliCommand
ReqCliCommand is a bit special in that it can be used as both method and replyMethod
The final result, if any, of the replyMethod will be sent to the central server.
By using the {{STEWARD_DATA}}
you can grab the output of your initial request method, and then use it as input in your reply method.
NB: The echo command in the example below will remove new lines from the data. To also keep any new lines we need to put escaped quotes around the template variable. Like this:
\"{{STEWARD_DATA}}\"
Example of usage:
[
{
"directory":"cli_command_test",
"fileName":"cli_command.result",
"toNode": "ship2",
"method":"REQCliCommand",
"methodArgs": ["bash","-c","tree"],
"replyMethod":"REQCliCommand",
"replyMethodArgs": ["bash", "-c","echo \"{{STEWARD_DATA}}\" > apekatt.txt"],
"replyMethodTimeOut": 10,
"ACKTimeout":3,
"retries":3,
"methodTimeout": 10
}
]
Errors reporting
- Errors happening on all nodes will be reported back in to the node name defined with the
-centralNodeName
flag.
Prometheus metrics
- Prometheus exporters for Metrics.
Other
- More will come. In active development.
Howto
Build and Run
Steward is written in go, so you need Go installed to compile it. You can get go at https://golang.org/dl/.
- Clone the repository:
git clone https://github.com/RaaLabs/steward.git
.
- Change directory and build:
cd ./steward/cmd
go build -o steward
- Run the application with
env CONFIG_FOLDER </myconfig/folder/here> ./steward
You can get all the options with ./steward --help
Options for running
The location of the config file are given via an env variable at startup (default "./etc/).
env CONFIG_FOLDER </myconfig/folder/here>
// The configuration folder on disk
ConfigFolder string
// The folder where the socket file should live
SocketFolder string
// TCP Listener for sending messages to the system
TCPListener string
// The folder where the database should live
DatabaseFolder string
// some unique string to identify this Edge unit
NodeName string
// the address of the message broker
BrokerAddress string
// nats connect retry
NatsConnectRetryInterval int
// The number of the profiling port
ProfilingPort string
// host and port for prometheus listener, e.g. localhost:2112
PromHostAndPort string
// set to true if this is the node that should receive the error log's from other nodes
DefaultMessageTimeout int
// default amount of retries that will be done before a message is thrown away, and out of the system
DefaultMessageRetries int
// Publisher data folder
SubscribersDataFolder string
// central node to receive messages published from nodes
CentralNodeName string
// Path to the certificate of the root CA
RootCAPath string
// Full path to the NKEY's seed file
NkeySeedFile string
// The host and port to expose the data folder
ExposeDataFolder string
// Timeout for error messages
ErrorMessageTimeout int
// Retries for error messages.
ErrorMessageRetries int
// Make the current node send hello messages to central at given interval in seconds
StartPubREQHello int
// Start the central error logger.
// Takes a comma separated string of nodes to receive from or "*" for all nodes.
StartSubREQErrorLog bool
// Subscriber for hello messages
StartSubREQHello bool
// Subscriber for text logging
StartSubREQToFileAppend bool
// Subscriber for writing to file
StartSubREQToFile bool
// Subscriber for Echo Request
StartSubREQPing bool
// Subscriber for Echo Reply
StartSubREQPong bool
// Subscriber for CLICommandRequest
StartSubREQCliCommand bool
// Subscriber for REQToConsole
StartSubREQToConsole bool
// Subscriber for REQHttpGet
StartSubREQHttpGet bool
// Subscriber for tailing log files
StartSubREQTailFile bool
// Subscriber for continously delivery of output from cli commands.
StartSubREQCliCommandCont bool
How to Run
Nkey Authentication
Nkey's can be used for authentication, and you use the nkeySeedFile
flag to specify the seed file to use.
Read more in the sections below on how to generate nkey's.
nats-server (the message broker)
The broker for messaging is Nats-server from https://nats.io. Download, run it, and use the -brokerAddress
flag on Steward to point to the ip and port:
-brokerAddress="nats://10.0.0.124:4222"
There is a lot of different variants of how you can setup and confiure Nats. Full mesh, leaf node, TLS, Authentication, and more. You can read more about how to configure the Nats broker called nats-server at https://nats.io/.
Server config with nkey authentication
port: 4222
tls {
cert_file: "some.crt"
key_file: "some.key"
}
authorization: {
users = [
{
# central
nkey: <USER_NKEY_HERE>
permissions: {
publish: {
allow: ["ww.>","errorCentral.>"]
}
subscribe: {
allow: ["ww.>","errorCentral.>"]
}
}
}
{
# mixer
nkey: <USER_NKEY_HERE>
permissions: {
publish: {
allow: ["central.>"]
}
subscribe: {
allow: ["central.>","mixer.>"]
}
}
}
{
# node10
nkey: <USER_NKEY_HERE>
permissions: {
publish: {
allow: ["ww.central.>","errorCentral.>","ww.morningconductor.>"]
}
subscribe: {
allow: ["ww.central.>","ww.morningconductor.>"]
}
}
}
]
}
The official docs for nkeys can be found here https://docs.nats.io/nats-server/configuration/securing_nats/auth_intro/nkey_auth.
-
Generate private (seed) and public (user) key pair:
nk -gen user -pubout
-
Generate a public (user) key from a private (seed) key file called
seed.txt
.nk -inkey seed.txt -pubout > user.txt
More example configurations for the nats-server are located in the doc folder in this repository.
Examples for running Steward
To set the location of the config folder other than default, you should use the ENV variable CONFIG_FOLDER
.
Minimum config example
Start up a central server which will act as your command and control server.
env CONFIG_FOLDER=./etc/ ./steward --nodeName="central" --centralNodeName="central"
Start up a node that will attach to the central node
env CONFIG_FOLDER=./etc/ ./steward ./steward --nodeName="ship1" --centralNodeName="central"
& ./steward --node="ship2"
and so on.
Use the -help
flag to get all possibilities.
More details config example
A complete example to start a central node called central
.
env CONFIG_FOLDER=./etc/ ./steward \
-nodeName="central" \
-defaultMessageRetries=3 \
-defaultMessageTimeout=5 \
-subscribersDataFolder="./data" \
-centralNodeName="central" \
-startSubREQErrorLog=true \
-subscribersDataFolder="./var" \
-brokerAddress="127.0.0.1:4222"
And start another node that will be managed via central.
env CONFIG_FOLDER=./etc/ ./steward \
-nodeName="ship1" \
-startPubREQHello=200 \
-centralNodeName="central" \
-promHostAndPort=":12112" \
-brokerAddress="127.0.0.1:4222"
Message fields explanation
// The node to send the message to
toNode
// ToNodes to specify several hosts to send message to in the
// form of an slice/array.
toNodes
// The actual data in the message. This is typically where we
// specify the cli commands to execute on a node, and this is
// also the field where we put the returned data in a reply
// message.
data
// Method, what request type to use, like REQCliCommand, REQHttpGet..
method
// Additional arguments that might be needed when executing the
// method. Can be f.ex. an ip address if it is a tcp sender, or the
// shell command to execute in a cli session.
MethodArgs []string
// ReplyMethod, is the method to use for the reply message.
// By default the reply method will be set to log to file, but
// you can override it setting your own here.
replyMethod
// Additional arguments that might be needed when executing the reply
// method. Can be f.ex. an ip address if it is a tcp sender, or the
// shell command to execute in a cli session.
ReplyMethodArgs []string
// Initial message Reply ACK wait timeout
ACKTimeout
// Normal Resend retries
retries
// The ACK timeout of the new message created via a request event.
replyACKTimeout
// The retries of the new message created via a request event.
replyRetries
// Timeout for long a process should be allowed to operate
methodTimeout
// Timeout for long a process should be allowed to operate
ReplyMethodTimeout int
// Directory is a string that can be used to create the
//directory structure when saving the result of some method.
// For example "syslog","metrics", or "metrics/mysensor"
// The type is typically used in the handler of a method.
directory
// FileName is used to be able to set a wanted name
// on a file being saved as the result of data being handled
// by a method handler.
fileName
// operation are used to give an opCmd and opArg's.
operation
How to send a Message
The API for sending a message from one node to another node is by sending a structured JSON object into a listener port in of of the following ways.
- unix socket called
steward.sock
. By default lives in the./tmp
directory - tcpListener, specify host:port with startup flag, or config file.
- httpListener, specify host:port with startup flag, or config file.
Send to socket with netcat
nc -U ./tmp/steward.sock < myMessage.json
Sending a command from one Node to Another Node
Example JSON for appending a message of type command into the socket
file
[
{
"directory":"/var/steward/cli-command/executed-result",
"fileName": "some.log",
"toNode": "ship1",
"methodArgs": ["bash","-c","sleep 3 & tree ./"],
"method":"REQCliCommand",
"ACKTimeout":10,
"retries":3,
"methodTimeout": 4
}
]
Specify more messages at once do
[
{
"directory":"cli-command-executed-result",
"fileName": "some.log",
"toNode": "ship1",
"methodArgs": ["bash","-c","sleep 3 & tree ./"],
"method":"REQCliCommand",
"ACKTimeout":10,
"retries":3,
"methodTimeout": 4
},
{
"directory":"cli-command-executed-result",
"fileName": "some.log",
"toNode": "ship2",
"methodArgs": ["bash","-c","sleep 3 & tree ./"],
"method":"REQCliCommand",
"ACKTimeout":10,
"retries":3,
"methodTimeout": 4
}
]
Send the same message to several hosts by using the toHosts field
[
{
"directory": "httpget",
"fileName": "finn.no.html",
"toNodes": ["central","ship2"],
"methodArgs": ["https://finn.no"],
"method":"REQHttpGet",
"replyMethod":"REQToFile",
"ACKTimeout":5,
"retries":3,
"methodTimeout": 5
}
]
Send an Op Command message for process listing with custom timeout and amount of retries
[
{
"directory":"opcommand_logs",
"fileName": "some.log",
"toNode": "ship2",
"data": [],
"method":"REQOpCommand",
"operation":{
"opCmd":"ps"
},
"ACKTimeout":3,
"retries":3,
"replyACKTimeout":3,
"replyRetries":3,
"methodTimeout": 7
}
]
Send and Op Command to stop a subscriber on a node
[
{
"directory":"opcommand_logs",
"fileName": "some.log",
"toNode": "ship2",
"data": [],
"method":"REQOpCommand",
"operation":{
"opCmd":"stopProc",
"opArg": {
"method": "REQHttpGet",
"kind": "subscriber",
"receivingNode": "ship2"
}
},
"ACKTimeout":3,
"retries":3,
"replyACKTimeout":3,
"replyRetries":3,
"methodTimeout": 7
}
]
Send and Op Command to start a subscriber on a node
[
{
"directory":"opcommand_logs",
"fileName": "some.log",
"toNode": "ship2",
"data": [],
"method":"REQOpCommand",
"operation":{
"opCmd":"startProc",
"opArg": {
"method": "REQHttpGet",
"allowedNodes": ["central","node1"]
}
},
"ACKTimeout":3,
"retries":3,
"replyACKTimeout":3,
"replyRetries":3,
"methodTimeout": 7
}
]
Tail a log file on a node, and save the result of the tail centrally at the directory specified
[
{
"directory": "./my/log/files/",
"fileName": "some.log",
"toNode": "ship2",
"methodArgs": ["./test.log"],
"method":"REQTailFile",
"ACKTimeout":5,
"retries":3,
"methodTimeout": 200
}
]
You can save the content to myfile.JSON and append it to the socket
file:
nc -U ./steward.sock < example/toShip1-REQCliCommand.json
Concepts/Ideas
Naming
Subject
<nodename>.<method>.<command/event>
Nodename: Are the hostname of the device. This do not have to be resolvable via DNS, it is just a unique name for the host to receive the message.
Command/Event: Is the type of message sent. Descriptions of these commands/events are provided in this document:
CommandACK
EventACK
CommandNACK
EventNACK
Description of the differences are mentioned earlier.
Info: The command/event called MessageType are present in both the Subject structure and the Message structure. This is due to MessageType being used in both the naming of a subject, and for specifying message type to allow for specific processing of a message.
Method: Are the functionality the message provide. Example could be CLICommand
or Syslogforwarding
Complete subject example
For Hello Message to a node named "central" of type Event and there is No Ack.
central.REQHello.EventNACK
For CliCommand message to a node named "ship1" of type Command and it wants an Ack.
ship1.REQCliCommand.CommandACK
TODO
Implements a replyOpts message field
To be used for specifying options that can be needed for reply methods like external calls, etc.
Implements a repeat and repeatInterval message field
To specify how many times a message should be run and at what interval
Split out the different opCmd's into it's own request types
Move the processes map into it's own go routine
Use channels to update and get values, and get rid of the use of mutex's.
Services at startup of Steward. Could be implemented by having a local folder of messages to go through at startup. What is needed
- A Handler that writes to this folder.
- A Handler that can check what is in this folder.
- A Handler to remove messages from this folder.
A carrier type of message, that are able to forward a message on behalf of others, and are not directly ment for itself
Workflow request type
Implement a workflow request type that will allow steps to be executed, and rollback if something failed during execution.
Add Op option the remove messages from the queue on nodes
If messages have been sent, and not picked up by a node it might make sense to have some method to clear messages on a node. This could either be done by message ID, and/or time duration.
Disclaimer
All code in this repository are to be concidered not-production-ready, and the use is at your own responsibility. The code are the attempt to concretize the idea of a purely async management system where the controlling unit is decoupled from the receiving unit, and that that we know the state of all the receiving units at all times.
Also read the license file for further details.