Allows overriding the `redirect_uri` parameter sent to both the
authorization and token endpoints of the IdP. Typically this parameter
is hardcoded to `<public_baseurl>/_synapse/client/oidc/callback`.
Yet it can be useful in certain contexts to allow a different callback
URL. For instance, if you would like to intercept the authorization code
returned from the IdP and do something with it, before eventually
calling Synapse's OIDC callback URL yourself.
This change enables enterprise use cases but does not change the default
behaviour.
---
Best reviewed commit-by-commit.
---------
Co-authored-by: Eric Eastwood <erice@element.io>
Normally, when `discovery` is enabled,
`id_token_signing_alg_values_supported` comes from the OpenID Discovery
Document (`/.well-known/openid-configuration`). If nothing was
specified, we default to supporting `RS256` in the downstream usage.
This PR just adds support for adding a default/overriding the the
discovered value [just like we do for other things like the
`token_endpoint`](1525a3b4d4/docs/usage/configuration/config_documentation.md (oidc_providers)),
etc.
Document consequences of replacing secrets. The covered config options
are `registration_shared_secret`, `macaroon_secret_key`, `form_secret`
and `worker_replication_secret`.
Even though I looked at the source code to check the added documentation
is right, I would appreciate additional verification of the statements
made.
In an hand-wavy attempt at classifying how bad the consequences of
secret replacement are, I added some explanations as warnings and others
as regular paragraphs.
Closes#17971
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
In the current `attribute_requirements` implementation it is only
possible to allow exact matching attribute values. Multiple allowed
values for one attribute are not possible as described in #13238.
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Sebastian Neuser <pzkz@infra.run>
Co-authored-by: Quentin Gliech <quenting@element.io>
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
I forgot the guide applies to Oracle Linux as well. In fact, I ran a
small homeserver on OEL a few months back.
I did minimal installations on Rocky and OEL on VirtualBox and noticed
Codeready/Powertools repos aren't required, so I removed those commands
from the guide. I switched `RHEL`-references to `EL`.
#17423 was merged before I remembered about OEL but a new PR shouldn't
hurt :)
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
Adds a query param `type` to `/_synapse/admin/v1/rooms/{room_id}/state`
that filters the state event query by state event type.
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This is essentially matrix-org/synapse#14392. I didn't see anything in
there about updating sytest or complement.
The main driver of this is so that I can use `jsonb_path_exists` in
#17488. 😄
The existing `email.smtp_host` config option is used for two distinct
purposes: it is resolved into the IP address to connect to, and used to
(request via SNI and) validate the server's certificate if TLS is
enabled. This new option allows specifying a different name for the
second purpose.
This is especially helpful, if `email.smtp_host` isn't a global FQDN,
but something that resolves only locally (e.g. "localhost" to connect
through the loopback interface, or some other internally routed name),
that one cannot get a valid certificate for.
Alternatives would of course be to specify a global FQDN as
`email.smtp_host`, or to disable TLS entirely, both of which might be
undesirable, depending on the SMTP server configuration.
Another config option on my quest to a `*_path` variant for every
secret. This time it’s `macaroon_secret_key_path`.
Reading secrets from files has the security advantage of separating the secrets from the config. It also simplifies secrets management in Kubernetes. Also useful to NixOS users.
- Fetch the number of invites the provided user has sent after a given
timestamp
- Fetch the number of rooms the provided user has joined after a given
timestamp, regardless if they have left/been banned from the rooms
subsequently
- Get report IDs of event reports where the provided user was the sender
of the reported event
POST requests for account data, receipts and presence require the worker
to be configured as a stream writer. The regular expressions in the
default list don't assume any HTTP method, so if the worker is not a
stream writer, the request fails.
The stream writer section of the documentation lists the same regexps as
the one I'm removing, so people configuring stream writers can still
configure their routing properly.
More context:
https://github.com/element-hq/synapse/issues/17243#issuecomment-2493621645
Basically, if the client sets a special query param on `/sync` v2
instead of responding with `state` at the *start* of the timeline, we
instead respond with `state_after` at the *end* of the timeline.
We do this by using the `current_state_delta_stream` table, which is
actually reliable, rather than messing around with "state at" points on
the timeline.
c.f. MSC4222
Fixes#17823
While we're at it, makes a change where the redactions are sent as the
admin if the user is not a member of the server (otherwise these fail
with a "User must be our own" message).
Adds the option to load the Redis password from a file, instead of
giving it in the config directly. The code is similar to how it’s done
for `registration_shared_secret_path`. I changed the example in the
documentation to represent the best practice regarding the handling of
secrets.
Reading secrets from files has the security advantage of separating the
secrets from the config. It also simplifies secrets management in
Kubernetes.
Added a note in the documentation suggesting that users may set
`PYTHONMALLOC=malloc` when using `jemalloc`. This allows jemalloc to
track memory usage more accurately by bypassing Python's internal
small-object allocator (`pymalloc`), helping to ensure that
`cache_autotuning` functions as expected.
This doc change aims to provide more clarity for users configuring
jemalloc with Synapse.
Based on:
4ac783549c/synapse/metrics/jemalloc.py (L198-L201)
This was a note added in the PR to move to AGPL, which we failed to
remove before landing.
(The context for this was that we needed to decide if we were going to
change which debian repository we published too, but decided not to in
the end)
