Occasionally, swayidle crashes with a failure to connect to the
Wayland session. Ideally, swayidle should automatically restart
instead of leaving the system in a vulnerable state.
When a user references config.programs.firefox.package in her/his
configuration, s·he will get a different path than what is in the
$PATH variable. To make it possible to get the same path, this commit
introduces the finalPackage read-only option.
Due to the defaults in `systemd.user.settings`, the default value when
there are no settings explicitly set is `{ Manager = { }; }`. This
means an empty file is created even when `systemd.user.settings` is
never used in home-manager configuration. Since user’s `user.conf` is
preferred to the global `/etc/systemd/user.conf`, this can cause any
values set in the latter to be discarded.
The `systemd.user.extraConfig` provides a way to generate a
`systemd-user.conf(5)` file for the user.
This is the home-manager equivalent of NixOS’s option of the same
name, with the difference that NixOS’s option generates a `user.conf`
file that is shared between all users.
This commit fixes a typo in XDG data directory link location in the
`home.pointerCursor` module where the link is placed at
$XDG_DATA_HOME/.icons instead of the correct location
$XDG_DATA_HOME/icons.
Fixes#4638
This commit changes the config format of repositories to the
soon-be-expected `{ "path": "repository-path", }`. The Home Manager
configuration allows a simple string (which will get translated), the
new format by directly using the path attribute, and the one with the
optional label attribute. More information about the background can be
found here https://torsion.org/borgmatic/docs/reference/configuration/
* k9s: add hotkey option
This PR adds an option to customise k9s hotkeys.
The keyword `hotKey` must be in camel case on the user config.
* Update modules/programs/k9s.nix
Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
* fix formatting
---------
Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
When xdg.enable is set, aerc uses the $XDG_CONFIG_HOME variable instead
of the default $HOME/Library/Preferences. home-manager needs to check
this to make sure aerc can find the proper file in both cases.
Closes#2923 based on how arnarg solves this in his personal config.
With review suggestions from musjj.
Co-authored-by: Arnar Gauti Ingason <arnarg@fastmail.com>
Co-authored-by: musjj <72612857+musjj@users.noreply.github.com>
When a process inside the sxhkd scope is OOM killed, if the OOM policy
is set to `stop` then the sxhkd scope itself will exit, terminating
every process launched from the keyboard.
This is undesirable, set it to `continue` instead to keep other
processes running.
For devices with more than one battery, cbatticon allows to set the
battery ID as optional positional argument. If this argument is not
given, it default to the first battery it would list with `cbatticon
-p`. This commit adds support for the batteryId option to the cbatticon
module.
Since fzf 0.43.0, the fzf_key_bindings function is only defined when
fish is running interactively, see [1].
This caused errors when entering non-interactive fish shells since we
called fzf_key_bindings during startup.
[1]: 7e89458a3b
The configuration file format of borgmatic has changed in version
1.8.0:
https://projects.torsion.org/borgmatic-collective/borgmatic/src/branch/main/NEWS
This commit makes Home Manager generate borgmatic's configuration file
using the new format.
Even though the NEWS file indicates that old configuration files are
compatible, this is not 100% the case: empty sections work fine in old
borgmatic but stop working in new ones. I've reported the bug upstream
by email as I couldn't create an account on the forge.
Specifically, allow variable expansion for the key codes by switching
from single to double quotes.
This also adds a helpful suggestion to descriptions. Taken from the
project's README, see
4abed97b6e/README.md (L71-L74))
Allows users to customize which environment variables to import in DBus
and SystemD user environments, and to specify which commands will be run
after the environment activation.
The way the `bat` module is currently written makes it essentially
impossible to use themes and syntaxes without IFD, since you must
provide the contents as string, instead of just giving a path to be
linked.
With this change, setting themes/syntaxes by-string will start issuing
warnings, and a new attribute model is added, lightly inspired by how
`programs.zsh.plugins` avoided this issue.
For some reason, Firefox completely discards the ADD_DATE and
LAST_MODIFIED attributes if they are set to 0. This has been
confirmed by exporting a sample set of bookmarks generated by
Nix using home-manager and comparing it to the same sample of
bookmarks set manually and then exported.
Missing these attributes can cause problems for extensions and
other tools that try to read bookmarks. A known example is the
Tridactyl extension.
Currently translated at 94.4% (17 of 18 strings)
Translate using Weblate (Indonesian)
Currently translated at 68.5% (24 of 35 strings)
Translate using Weblate (Indonesian)
Currently translated at 61.1% (11 of 18 strings)
Translate using Weblate (Indonesian)
Currently translated at 42.8% (15 of 35 strings)
Co-authored-by: Reza Almanda <rezaalmanda27@gmail.com>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/id/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/id/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
- If the parse does not match/returns an empty list, transpose does
not transform it into a record and thus load-env fails.
- The parsing assumes keychain to emit bash-style completions, so set
SHELL=bash to ensure keychain output is in the expected format.
PR #4459
Make the `finalPackage` option public, but still read-only. The final
package option is quite useful for users.
For example, to integrate `lazy.nvim` with Nix there are three things
that must be done:
1. `lazy.nvim` resets packpath, which should be managed by Nix; it has
to be turned off with `performance.reset_packpath = false` option in
`lazy.nvim`
2. Same thing applies to rtp, the relevant option is
`performance.rtp.reset = false`
3. `dev.path` must be specified as the folder that contains the plugins.
This folder is the path to Nix store path with Neovim plugins, and
the plugins that are managed by Nix must be marked as `dev = true`
The third condition can not be fulfilled without this PR, as the final
package that Home Manager produces is not exposed, therefore it is
impossible to extract the Nix store path. This PR makes it more
accessible via
${
pkgs.vimUtils.packDir config.programs.neovim.finalPackage.passthru.packpathDirs
}/pack/myNeovimPackages/start
With nushell `0.85.0` this is no longer valid syntax. This change fixes
the syntax error with `0.85.0` while still remaining valid for `0.84.0`
and earlier.
Fixesnix-community/home-manager#4488
The default config for sway generates a bar block with tray_output primary. But wayland (or sway, take your pick?) has no concept of a primary display so this just results in no tray anywhere.
A better default is "*" which puts the tray on every monitor, since sway can do so without issue.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Adds a programs.rio module to control Rio installation and configuration, a gpu accelerated terminal
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
An IFD was introduced in bdb5bcad01 from
reading the top-level directories of the `home.pointerCursor.package`
at instantiation time.
This commit removes the IFD introduced when linking icon directories
by linking only the icon directory matching `home.pointerCursor.name`
in `home.pointerCursor.package`. This should be functionally
equivalent to linking all top-level directories of the supplied icon
package as the module only generates cursor configurations pertaining
to the cursor identified by `home.pointerCursor.name`. Deviations in
behavior caused by additional files linked in $HOME/.icons as of the
status quo should be treated as impurities.
The current cursor configuration poorly accomodate applications not
following the XDG icon theme spec. As a result, some applications fail
to locate user defined icons and themes.
To address this, symlinks from icon directories in the provided cursor
package was to $HOME/.icons were added added for greater compatibility
with applications using hardcoded icons directories. This approach was
chosen to allow for coexistence of declarative and non-declarative
icon files in the icons directory. In addition, symlinks of icon
directories were mirrored in $XDG_DATA_HOME/.icons for backwards
compatibility. As per the XDG icon theme spec, applications are to
search in $HOME/.icons first for icons and themes so the existing
behavior should not break for XDG compliant applications[1].
[1] https://specifications.freedesktop.org/icon-theme-spec/latest/ar01s03.html
Remove xwayland.hidpi option, since we're dropping HiDPI XWayland
patches support, opting to use the builtin xwayland:force_zero_scaling
option instead. It is described in more detail in
https://wiki.hyprland.org/ Configuring/XWayland.
Don't try to validate a limited set of hardcoded options, instead just
convert them as-is. Now, users can keep all their options in a single
attribute set, including arbitrary `user_{option}`s which was impossible
to express with a hard-coded submodule. As a plus, there is also less
maintainence burden.
While the locale options were declared, the weren't used in the
generation of the config file, because the locale submodule missed a
default, which failed the tests. I added an empty attribute set as a
default, which fixes the test, and works with the defaults in the
submodule options as expected.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
* gh: option to enable helper for additional hosts
`gh` can also be used with github enterprise
hosts, for which there exists no easy option
to enable the credential helper except for
directly working with `programs.git.extraConfig`.
Not sure if this is a needed addition since it's
somewhat niche, at the same time it's not very
complex and makes the life of github enterprise
a little easier.
* gh: update credential-helper tests
* gh: refactor credential helper option
this moves from `enableGitCredentialHelper` to
`gitCredentialHelper.enable` and
`gitCredentialHelper.hosts`.
* gh: lib.mkIf -> mkIf
- On darwin, creates a launch agent to run git-sync on an interval and
when the `path` changes.
- The `uri` option is not used on Darwin. The auto-creation of the
local git directory from the `uri` is a feature of the
git-sync-on-inotify [1] wrapper (which won't work on Darwin afaik)
and not `git-sync` itself.
[1] https://github.com/simonthum/git-sync/blob/master/contrib/git-sync-on-inotify
* hyprland: prioritize variables and beziers
The `settings` key now handles `$variables` and `bezier`s differently,
putting them at the top of the file.
Also, proper indentation has been implemented.
* Update modules/services/window-managers/hyprland.nix
Co-authored-by: Naïm Favier <n@monade.li>
* hyprland: add animations & beziers test
---------
Co-authored-by: Naïm Favier <n@monade.li>
