There are 2 minor issues with this test:
1. It specified `cmdstat_replconf` as `cmd_stats` instead of `cmd`,
that's clearly a typo as `cmd_stats` is a map with stats, while
`replconf` is a Dragonfly command
2. Command `MULTI` is allowed to run even when the server is in paused
state, see
[here](https://github.com/dragonflydb/dragonfly/blob/main/src/server/main_service.cc#L1197):
```
// Don't interrupt running multi commands or admin connections.
```
Fixes#3675
We disable address space randomization when building the binary
and use addr2line to symbolize the stacktrace if it exists.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
chore: deprecate RecordsPopper and serialize channel records during push
Records channel is redundant for DFS/replication because we have single producer/consumer
scenario and both running on the same thread. Unfortunately we need it for RDB snapshotting.
For non-rdb cases we could just pass a io sink to the snapshot producer,
so that it would use it directly instead of StringFile inside FlushChannelRecord.
This would reduce memory usage, eliminate yet another memory copy and generally would make everything simpler.
For that to work, we must serialize the order of FlushChannelRecord, and that's implemented by
this PR. Also fixes#3658.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* fix: crash when passing empty arguments
Fix the case where we pass an empty argument, which then is parsed as an
empty string view with null pointer. The null pointer is not handled correctly
by our low level c code, hence switch to using ""sv for that.
* chore: add more list asserts + improve test_hypothesis
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
1. The offset value can be negative, in that case we should return an empty array.
2. Fix edge cases of inf*0 and -inf + inf, so they will result in 0 and non NaN (similarily to Valkey).
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
For legacy mode:
1. For mutate commands, an empty result should throw an error
2. For read commands, it returns nil if path was not found, but if it was matched
but only with a wrong types, it will throw an error.
For non-legacy mode, objlen should throw an error for non existing key.
Simplified JsonCallbackResult a bit and made sure more fakeredis tests are passing.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* feat: add slave_repl_offset to the replication section.
In Valkey slave_repl_offset denotes the replication offset on replica site during stable sync phase.
During fullsync phase it appears with 0 value.
In Dragonfly this field appears only after full sync has completed, thus it allows
to check whether Dragonfly reached stable sync phase. The value of this field describes the cumulative progress
of all the replication flows and it does not directly correspond to master side metrics.
In addition, this PR fixes the bug in wait_available_async() function in our replication tests.
This function is intended to wait until a replica reaches stable state and it did by sending pings until they do not
respond with LOADING error, hence the assumption is that the replica is in full sync state already.
However it can happen that master_link_status is "up" but replica has not reached full sync state, and the PING will succeed
just because wait_available_async() was called before full sync started. The whole approach of polling the state is fragile.
Now we use `slave_repl_offset` explicitly to see if the replica reaches stable state.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* chore: simplify wait_available_async
* chore: comments
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* chore: enable experimental_new_io by default.
It has been running for weeks with the flag on, so enabled it also for community.
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
Signed-off-by: Vladislav Oleshko <vlad@dragonflydb.io>
Co-authored-by: Vladislav Oleshko <vlad@dragonflydb.io>
* fix: xreadgroup replies as a map for RESP3
Moreover, it returns data for all the strings, irrespective whether they have results or not
(unlike with XREAD)
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* fix: properly handle xpending with 0 results
Also reject ENTRIESREAD instead of silently accepting it.
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* fix: JSON.STRAPPEND
JSON.STRAPPEND was completely broken.
First, it accepts exactly 3 arguments, i.e. a single value to append.
Secondly, the value must be a json string, not the regular string. Meaning it must be in double quotes.
So, before we parsed: `JSON.STRAPPEND key $.field bar` and now we parse:
`JSON.STRAPPEND key $.field "bar"`
In addition fixed the behavior of JSON.STRLEN to return "no such key" error in case the
json key does not exist and path is specified.
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* chore: improve compatibility of set and ping commands
smismember should return an array of longs and not array of strings.
ping in subscribe mode returns an array for resp2.
Also, fix double rounding for legacy float mode.
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
1. Fix corner cases around non existing keys
2. Fix matching logic for * glob, as well as '' glob.
3. Improve SORT option parsing.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* feat(cluster): Allow appending RDB to existing store
The goal of this PR is to support the loadoing of multiple RDB files into a single server, like when migrating from a Valkey cluster to Dragonfly with a different number of nodes.
It makes the following changes:
* Removes `DEBUG LOAD`, as we already have `DFLY LOAD`
* Adds `APPEND` option to `DFLY LOAD` (i.e. `DFLY LOAD <filename> APPEND`) that loads an RDB without first flushing the data store, overriding existing keys
* Does not load keys belonging to unowned slots, if in cluster mode
Fixes#2840
Background
We tried to be compatible with Valkey in their support of Lua flags, but we generally failed:
We are not really compatible with Valkey because our flags are different (we reject unknown flags, and Valkey flags are unknown to us)
The #!lua syntax doesn't work with Lua (# is not a comment), so scripts written for older versions of Redis can't be used with Dragonfly (i.e. they can't add Dragonfly flags and remain compatible with older Redis versions)
Changes
Instead of the previous syntax:
#!lua flags=allow-undeclared-keys,disable-atomicity
We now use this syntax:
--!df flags=allow-undeclared-keys,disable-atomicity
It is not backwards compatible (with older versions of Dragonfly), but it should be very easy to adapt to, and doesn't suffer from the disadvantages above.
Related to #3512
* fix truncating the timeout red dots on CI failures
* fix deprecated use of with timeout warnings
* remove @pytest.mark.dbg_only as it doesn't exist
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
There are some problematic flows. First we did not handle deletions, so all sorts of consistency issues could arise while calling DbSlice::Traverse() and DbSlice::Del(). Second, we did not handle FlushAll (same as before, Traverse() preempts and FlushAll() kicks in. Third we did not handle expirations.
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
**Background**
In v1.21.0 we introduced support for `--announce_ip` for replicas to
announce their public IP addresses.
Like Valkey, this uses `REPLCONF IP-ADDRESS` to announce their IP
address.
**The issue**
Older Dragonfly releases (<1.21) did not support this feature. The
master side simply returned an error for such `REPLCONF` attempts,
however the replica code failed the replication, resulting in
incompatible versions.
**The fix**
The fix is simple, just log an error if the master did not respect
`REPLCONF IP-ADDRESS`. We can make this non-optional in the future
again.
However, in addition, I added a regression test to make sure we are
backwards compatible with v1.19.2. We'll bump this up every once in a
while.
* chore: add timeout fo replication sockets
Master will stop the replication flow if writes could not progress for more than K millis.
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
Signed-off-by: Roman Gershman <romange@gmail.com>
Co-authored-by: Shahar Mike <chakaz@users.noreply.github.com>
os.remove(LAST_LOGS) might throw an exception if the file does not exist which we do not handle. Wrap it in try/catch block
* wrap in try/catch os.remove
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
The env variables exported when regression tests timeout are not working properly and the if statement on the action step Print last log on timeout would fail to read and upload the files set in /tmp/last_log_file.txt. Furthermore, another problem is the job.timeout argument that kills the whole job/matrix before the upload log step has a chance to run. For that, we need manual timeouts on the workflow similar to what we do in regression tests action.
* remove print last log on timeout action step
* copy the logs on timeout directly within the timeout step
* replace global timeout on CI workflow with timeout command per step
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
* chore: improve replication locks
Allow non-exclusive, read-only access to Dfly::ReplicaInfo structure.
The most important change is in DflyCmd::CancelReplication, where before
it has locked ReplicaInfo mutex and then continued with locking the global mutex.
It is dangerous because most operation lock them in the opposite order.
Also rename ambigous GetReplicaInfo accessors to clearer names.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* chore: comments
* chore: comments
---------
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* feat: Support `replica-announce-ip`/`port`
Before this PR, we only supported `cluster_announce_ip`.
It's basically the same feature, but used for cluster announcements
instead of replication.
This PR adds support for `replica-announce-ip` and
`replica-announce-port`, which can be set via new flags `--announce_ip=`
and `--announce_port=`. These flags apply to both cluster and replica
announcements.
Tested via running Sentinel, and making sure it is able to connect to
announced ip+port, while it can't connect to announced false /
unavailable ip+port.
Note: this PR deprecates `--cluster_announce_ip`, but continues to
support it. We will remove it in a future version.
Fixes#3380
* fix failing test
* destructure
1. Add background offloading stats
2. remove direct_fd override - helio is already updated with default=false, so it's not needed anymore.
3. remove redundant tiered_storage_memory_margin flag
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
DastTable::Traverse is error prone when the callback passed preempts because the segment might change. This is problematic and we need atomicity while traversing segments with preemption. The fix is to add Traverse in DbSlice and protect the traversal via ThreadLocalMutex.
* add ConditionFlag to DbSlice
* add Traverse in DbSlice and protect it with the ConditionFlag
* remove condition flag from snapshot
* remove condition flag from streamer
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
Update the flag for extreme testing. We should remove this before the release.
* set serialization_max_chunk_size to 1 byte
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
The problem is that the test test_big_value_serialization_memory_limit will try to shutdown dragonfly at the end with a timeout of 15 seconds. Dragonfly during shutdown takes a snapshot which might take more than 15 seconds and the test fails.
* call flushall before we exit the test
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
* fix: Fix `test_take_over_seeder`
There are a few issues with the test:
1. Not using the admin port, which could cause pause to deadlock
2. Not waiting for some of the `task`s (although that won't cause a
failure)
But also in the product code:
1. We used to `std::move()` the same pointer multiple times
2. We assigned to the same status object from multiple threads
Hopefully this fixes the test. It used to fail every ~100 attempts on my
machine, now it's been >1,000 and they all passed.
* add comments
* remove shard_ptr param
* default serialization_max_chunk_size to 10 mb
* add test for big values
* small rename of enum to conform style guide
---------
Signed-off-by: kostas <kostas@dragonflydb.io>
* chore: fix test_parser_memory_stats flakiness
1. Added a robust assert_eventually decorator for pytests
2. Improved the assertion condition in TieredStorageTest.BackgroundOffloading
3. Added total_uploaded stats for tiering that tells how many times offloaded values
were promoted back to RAM.
* chore: skip test_cluster_fuzzymigration
Leave only connection memory usage in memory stats.
We should think how we can move it also to /metrics.
In addition, added a test verifying that redis parser memory
usage is tracked.
Signed-off-by: Roman Gershman <roman@dragonflydb.io>
* fix replication test flag name for big values
* fix a bug that triggers ub when RegisterOnChange is called on flows that iterate over the callbacks and preempt
* add a stress test for big value serialization
Signed-off-by: kostas <kostas@dragonflydb.io>
* serialize big slots in chunks
* allow preemption on large slots
* disable big entries serialization for RDB files
* add test
Signed-off-by: kostas <kostas@dragonflydb.io>
* feat(namespaces): Initial support for multi-tenant #3050
This PR introduces a way to create multiple, separate and isolated
namespaces in Dragonfly. Each user can be associated with a single
namespace, and will not be able to interact with other namespaces.
This is still experimental, and lacks some important features, such as:
* Replication and RDB saving completely ignores non-default namespaces
* Defrag and statistics either use the default namespace or all
namespaces without separation
To associate a user with a namespace, use the `ACL` command with the
`TENANT:<namespace>` flag:
```
ACL SETUSER user TENANT:namespace1 ON >user_pass +@all ~*
```
For more examples and up to date info check
`tests/dragonfly/acl_family_test.py` - specifically the
`test_namespaces` function.
